Model Number

TTE-328

The USB 3.0 specification is the combination of the physical SuperSpeed bus combined in parallel with the physical USB 2.0 bus. Cable is 4 wire. The data wires are 28AWG, the power wires are 20 to 28AWG. Two power lines are un-twisted and 2 data lines, twisted. Longer cables will use 20AWG for power. The wire are coded per the drawing above. Cables will have an a A plug on one end and a B plug on the opposite end. The maximum cable length is 5 meters, however that can be increased by using hubs. The USB interface is designed to operate down to -20 degree C.

The USB 3.0 specification is the combination of the physical SuperSpeed bus combined in parallel with the physical USB 2.0 bus. Cable is 4 wire. The data wires are 28AWG, the power wires are 20 to 28AWG. Two power lines are un-twisted and 2 data lines, twisted. Longer cables will use 20AWG for power. The wire are coded per the drawing above. Cables will have an a A plug on one end and a B plug on the opposite end. The maximum cable length is 5 meters, however that can be increased by using hubs. The USB interface is designed to operate down to -20 degree C.